Slightly higher opacity and considerably better rheological properties at higher pigment concentrations than Permanent Red FGR and therefore of particular interest for opaque full shades in the signal red range. Slightly lower tinctorial strength in reductions with titanium dioxide. Fastness properties virtually the same.
Application Profile
Special Recommendations
● recommended ○ limited suitability – not recommended
Physical Data
Fastness Data
LOA- Air-drying Long Oil Alkyd AM- Baked Alkyd-Melamine NC- Nitrocellulose Combination Lacquer
C. I. Name | Pigment Red 112 |
---|
1 | |
Acids | 5 |
Water | 5 |
1/3 ST | 2-3 |
Alkali | 5 |
Xylene | 2-3 |
1/25 ST | 2-3 2 |
Butanol | 3-4 |
Blooming | Risk of blooming |
Deep shade | 3-4 3 |
Full shade | 4-5 |
Butyl Glycol | 3 |
White Spirit | 4 |
Butyl Acetate | 2-3 |
Dibutyl Phthalate | 3 |
Methyl Ethyl Ketone | 2-3 |
Fastness to Overpainting | AM (160°C) AM (120°C) |
Density | 1.48 [g/cm3] |
---|---|
Form of Supply | powder |
Heat Stability | 180 [°C] |
Oil absorption | 48 [ml/100g] |
Specific surface | 11 [m2/g] |
Avg. Size of Primary Particles | 295 [nm] |
Baking Enamels | ○ |
---|---|
Acid Cured Paints | ● |
Air-drying Alkyds | ● |
Waterbased Paints | ● |
Amine Cured Epoxies | ○ |
Isocyanate Cured Paints | ○ |
Physically Drying Paints | ● |