Pigment Yellow 83
Heubach
Novoperm Yellow HR 72 PY83
Novoperm Yellow HR 72 is a modified version of Novoperm Yellow HR 70. Optimum tinting strength can be achieved in relatively short time using a dissolver and suitable dispersing agents. The simplified dispersion process that does not include a bead mill results in a cost efficient manufacturing of pigment dispersions. Furthermore dispersions made with Hostaperm Yellow HR 72 can be used to tint the new generation of low VOC decorative paints.** As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products.
Benefits
Product Data
Application Profile
Special Recommendations
● recommended ○ limited suitability – not recommended
Physical Data
Fastness Data
LL – Air-drying paint EL – Stoving enamel NC – Nitrocellulose Combination Lacquer
| C. I. Name | Pigment Yellow 83 |
|---|
TECHNICAL DATA:
FASTNESS DATA
| 4-5 5 | |
| Acids | 5 |
| Water | 5 |
| 1/3 ST | 3-4 3 |
| Alkali | 5 |
| Xylene | 4-5 |
| 1/25 ST | 2-3 2 |
| Butanol | 4-5 |
| Blooming | No blooming observed |
| Deep shade | 3-4d |
| Full shade | 4d |
| Butyl Glycol | 4-5 |
| White Spirit | 5 |
| Butyl Acetate | 4-5 |
| Dibutyl Phthalate | 4-5 |
| Methyl Ethyl Ketone | 4-5 |
| Fastness to Overpainting | EL (160°C) EL (120°C) |
PHYSICAL DATA
| Density | 1.50 [g/cm3] |
|---|---|
| Form of Supply | powder |
| Heat Stability | 200 [°C] |
| Oil absorption | 57 [ml/100g] |
| Specific surface | – [m2/g] |
| Avg. Size of Primary Particles | – [nm] |
SPECIAL RECOMMENDATIONS
| Baking Enamels | ● |
|---|---|
| Acid Cured Paints | ○ |
| Air-drying Alkyds | ● |
| Waterbased Paints | ● |
| Amine Cured Epoxies | ○ |
| Isocyanate Cured Paints | ● |
| Physically Drying Paints | ● |